Dextran Methacryloyl(DexMA)

Dextran Methacryloyl, DexMAEFL-DexMA-200K/500K The kit includes Dextran Methacryloyl and photoinitiator LAP. It is used in cell culture, biological 3D printing, tissue engineering, etc. This product i

Offline procurement consulting

        Phone:15335258233;

        Email:engforlife-mkt@efl-tech.com


Product introduction

      Dextran methacryloyl ( DexMA ) is a double bond modified dextran, which can be crosslinked and solidified into a gel by UV and visible light under the action of photoinitiator. Due to the excellent water solubility, good biosafety and anti-nonspecific protein adsorption of DexMA, DexMA-based material systems have been widely used in biomedical fields, such as reducing thrombosis in blood vessels, reducing blood viscosity and drug delivery.


Specification and type】

图1.png

图2.png


Applications】

       Cell culture, biological 3D printing, tissue engineering, etc.


Storages】

       Dry kit: room temperature, 3 months; 4℃, 12 months; -20℃, 18 months.


HNMR】

图片1.png

EFL-DexMApreparation process and HNMR


Rheological characteristic】

图片2.png

The rheological properties of EFL-DexMA-200K at different concentrations :

( A ) photocuring process ; ( B ) Storage modulus after curing ; ( C, D ) viscosity


Rheological characteristic】

图片3.png

The rheological properties of EFL-DexMA-500K at different concentrations :

( A ) photocuring process ; ( B ) Storage modulus after curing ; ( C, D ) viscosity 


Compression characteristic】

图6.png

Compression deformation detection of different concentrations of EFL-DexMA-200K ( A, B ) and EFL-DexMA-500K ( C, D )


Biological properties】

图片4.png

EFL-DexMA hydrogel 3D cell ( HUVECs ) culture


3D printing performance】

图片5.png

The DexMA gel structure printed by a photocuring biological 3D printer ( EFL-BP-86 series )

【Product Manual】-【EFL-DexMA series】-Dextran Methacryloyl 

Copyright ©2022 Copyright: EFL-Tech Co.,Ltd, Suzhou, China 苏ICP备19070244号-1

Technical support: Wanhe Technology